Triple O-ring stem seals - The top O-ring serves as a dirt seal. The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position. Forged bronze stem and thrust collar - This time-tested Mueller design has two thrust washers and has repeatedly proven its superior strength over cast stems. Bronze stem nut - The nut is electrically isolated from the iron in the wedge for corrosion resistance. The nut is held tightly in place to resist stem binding. O-ring - Provides superior bonnet seal (4" - 12" sizes). Polymer wedge guide bearing caps - Provide bearing surface between the encapsulated wedge and the interior epoxy coating, lowering operating torque and extending service life of the valve.

Mueller® Resilient Wedge Gate Valve Triple Listed Valve full complies with AWWA C509 Listed by Underwriters Laboratory Inc. and ULC Approved by Factory Mutual Corp.

	Oversized, full port opening, smooth waterway - The bottom of the waterway has no grooves or recesses to collect sediment or debris and compromise the seal. Accommodates full-sized shell cutters with ample clearance during tapping operations.
	Mueller® PRO-GARDTM Epoxy Coating System - The superior fusion-bonded (thermosetting) powder epoxy covers the interior and exterior with a thickness of 10 mils nominal. The powder epoxy coating fully complies with ANSI/AWWA Standard C550.
	Integral legs - Flats cast in the bottom of the valve body let the valve stand upright in storage or during installation.

Resilient Wedge Gate Valves and Styles

Mueller® Resilient Wedge Gate Valves - Styles and Sizes

The 2360 SeriesTM Valve is available as a non-rising stem (NRS) valve in 2" - 12" sizes ("A" catalog number prefix), and as an OS&Y valve in 2 ½" - 12" sizes ("R" prefix). It is also available in tapping ("T" prefix) and cut-in ("C" prefix) valve styles. NOTE: All Series 2360 valves with mechanical joint ends are available less accessories. Refer to Mueller Water Distribution Products Catalog for catalog number. A UL/FM position indicator style valve ("P" prefix) in 4" - 12" sizes and selected types of end connections is available (also as a tapping valve - "T" prefix). Refer to the Mueller Fire Protection Products Catalog for details. Resilient wedge valves with flange x flange, MJ x flange, and MJ x MJ ends in sizes 14" - 24" (16" also with slip-on x slip-on and slip-on x flange) are offered with many of the features described here, but may vary in design details. Refer to the Mueller Water Distribution Products Catalog for specific characteristics, features, dimensions and catalog numbers for these larger valves.

DIMENSIONS FOR MUELLER® RESILIENT WEDGE GATE VALVE - INCHES (Refer to catalog for dimensions of valves 14" - 24") Dimensions* Valve size - Nominal sizes 2" 2 ½" 3" 4" 6" 8" 10" 12" A NRS   OS&Y Open 9.88 -- 12.38 19.50 12.38 19.25 14.19 23.68 18.00 31.38 21.50 38.50 25.50 47.00 28.62 53.50 E Diameter of hand wheel 6.00 6.00 8.00 11.00 13.00 14.00 16.00 16.00 H Radial -- end-to-end 10.25 10.75 11.75 13.43 15.91 18.40 -- -- I Depth of socket 3.50 3.69 4.12 4.46 5.46 6.20 -- -- K MJ -- end-to-end 8.50 -- 9.00 10.00 11.50 12.50 14.75 14.88 L Depth of socket 2.50 -- 2.50 2.50 2.50 2.50 2.50 2.50 Q Flanged -- face-to-face 7.00 7.50 8.00 9.00 10.50 11.50 13.00 14.00 R Outside diameter 6.00 7.00 7.50 9.00 11.00 13.50 16.00 19.00 V Threaded end-to-end 5.88 5.88 6.88 -- -- -- -- -- AA OS&Y Closed -- 15.75 15.50 19.00 24.50 29.50 35.75 40.50 BB Slip-on -- end-to-end -- -- -- 12.81 14.81 17.88 18.43 18.62 CC Depth of socket -- -- -- 4.12 4.38 5.62 5.62 5.62 EE OS&Y Hand wheel diameter -- 7.00 7.00 10.00 12.00 14.00 16.00 16.00 YY MJ x Flg. -- end-to-end -- -- -- 9.50 11.00 12.00 13.88 14.44 GGG Slip-on x Flg. -- end-to-end -- -- -- 10.91 12.66 14.69 15.72 16.31 Turns to open -- NRS OS&Y 8 -- 11 11 11 11 14 14 20.5 20.5 26.5 27 33 33.5 38.5 39 Weight* -- Flg. x Flg. 37 71 73 95 154 250 402 502   MJ x Flg.** -- -- -- 115 168 275 418 526   MJ x MJ** 40 -- 83 120 186 280 436 546   Slip-on x Flg. -- -- -- 92 152 250 405 526   Slip-on x Slip-on -- -- -- 90 151 247 392 513   Rad. x Rad. 35 65 67 96 155 260 -- --   Thd. x Thd. 31 60 62 -- -- -- -- -- *All dimensions are in inches. All weights are for NRS valves; in pounds and are approximate. **Weight includes accessories.

Flange x Flange A-2360-6 Mechanical Joint x Flange A-2360-6±± T-2360-16 (Tapping Valve)±± Mechanical Joint x Mechanical Joint A-2360-20±± A-2360-25 (w/transition gaskets) Slip-on x Flange A-2360-41+±±   Slip-on x Slip-on A-2360-38+±± D-150 Mechanical Joint x D-150 Mechanical Joint C-2360-54 (Duck Tipped)++ C-2360-55 (Plain Tipped)++ Radial x Radial A-2360-37 Threaded x Threaded A-2360-8   OS&Y Flange x Flange R-2360-6 OS&Y Threaded x Threaded R-2360-8 ± Specialty valve styles not illustrated + Socket depths have been increased on the slip-on style to enhance the pipe joint. ±± Also available without accessories or gaskets. ++ Bonding screws optional